Exercise #10 |
||||
 Previous |
|
 Next |
||
- Problem - The original base case 68-h duration simulation was illustrated by an animation showing the sequence of model calculated three hour average concentration in comparison with the measurement data averaged over the duration of the sampling. Reproduce this graphic but use the measurement data corresponding with each sampling period.
- Hint - Retrieve captex_control.txt and captex_setup.txt from the original CAPTEX configuration and remember that most of the sampling data in captex2_meas.txt are of 6 h duration. If you ignore the 3 h duration samples and then you can start model output at 0300, 0900, 1500, and 2100 hours.
- Solution - concplot.gif