- The objective is to create a CONTROL file for a vertical line source
- With four different particle sizes, each with different emission rates
control_volc.txt | load control file |
setup_volc.txt | load setup file |
Initial phase: the first 12 hours
63.63 -19.62 100.0 | line source bottom |
63.63 -19.62 6000.0 | line source top |
Total Emission = 10,000 T/hr
P006 0.008E+16 | 0.6 μm |
P020 0.068E+16 | 2.0 μm |
P060 0.250E+16 | 6.0 μm |
P200 0.670E+16 | 20. μm |
12 | release duration |
45.0 0.0 | grid center |
0.25 0.25 | resolution |
90.0 360.0 | grid span |
10000 | vertical extent |
06 | sampling duration |
0.6 2.5 1.0 | 0.6 μm diameter, density, shape |
2.0 2.5 1.0 | 2.0 μm diameter, density, shape |
6.0 2.5 1.0 | 6.0 μm diameter, density, shape |
20. 2.5 1.0 | 20. μm diameter, density, shape |
SETUP.CFG namelist
numpar=5000 | particle number |
maxpar=50000 | maximum number |
numpar=12 | first output |
maxpar=12 | output interval |
All radiobutton | sum all pollutants |
100+50+20+10 | force contours μg |
|