Linear Mass Conversions


  • The conversion option is not intended to replace non-linear chemical models
  • Provides some guidance as to the potential effect of first-order transformations
  • ICHEM=2 automatically sets MAXDIM=2 to put new mass on different particles
  • Total mass will be the same as the no transformation simulation



captex_control.txt

   load control file

captex_setup.txt

   load setup file

25

   Run duration

20000

   Particle number



Base simulation no transformation

plot_base.html

   Run, Display, and save to

MESSAGE_base.txt

   Rename MESSAGE file to save



Define two pollutants: transforming #1 to #2

POL2

   Identification

0.0

   Emission rate

0.0

   Emission hours


ICHEM = 2

   namelist 10% conversion rate


plot_pol1.html

   Run, Display, and save to

plot_pol2.html

   Run, Display, and save to





1 2 0.10 1.0

   alternate approach chemrate.txt